Tito’s Martini Pumpkin Stencil
Give your pumpkin a little Tito’s flair. Download the stencil, grab your carving tools, and let your porch do the talking.
Time: About 1 hour
What You’ll Need
1 medium or large pumpkin with a smooth, flat side
Printed stencil - Click here to download your stencil!
Scissors
Pumpkin carving kit
Tape and a toothpick
LED candle
Steps
Prep. Cut a lid, scoop out the inside, and scrape the carving side until the wall is about 1 inch thick.
Cocktail Break. Pour yourself a Tito’s cocktail to enjoy along the way.
Print the stencil. Print it in landscape orientation on a standard 8.5 x 11 inch sheet of printer paper (US letter).
Make the paper flexible. Cut a short diagonal slit at each corner of the paper so it can bend around the curve of the pumpkin without wrinkling.
Tape it on. Center the stencil on the flat side of your pumpkin and tape down the edges, overlapping the slit flaps as needed.
Transfer. Poke small holes along the lines of the design, then remove the paper.
Carve the black areas. Black is cut out and white stays. Start with the small pieces (the splashes and the lettering), then do the glass. Be extra careful around the liquid line of the martini as that piece becomes narrow.
Light it up. Drop in an LED candle, replace the lid, and show it off.
Share your creation with us by tagging @titosvodka in your social post!
